Open
Conversation
Update the documentation on solver setup
Closed
suargi
changed the title
suargi
commented
Jun 29, 2022
| The DES constant can be controlledd by the field `DES_CONST`, with 0.65 as default. | ||
|
|
||
| #### Menter’s k-omega SST Model #### | ||
| As initial conditions, the values of are initialized at all grid point with the farfield values. The farfield conditions for the turbulent kinetic energy $k$ is computed as: $k = \frac{3}{2}(UI)$, whereby $U$ is the freestream velocity magnitude and $I$ is the turbulence intensity. This latter value can be specified in the config file by the `FREESTREAM_TURBULENCEINTENSITY` field, with defaul value to 0.05 which corresponds to a $5\%$. The freestream value of the turbulent frequency $\omega$ is computed as: $\omega = \frac{\rho k}{\mu}(\frac{\mu_t}{\mu})^{-1}$, where $\rho$ and $\mu$ are the freestream density and laminar viscosity respectively and $\frac{\mu_t}{\mu}$ is the turbulent viscosity ratio, also known as freestream dissipation. Its value can be specified in the `FREESTREAM_TURB2LAMVISCRATIO` field, defaulting to $10$. |
Author
There was a problem hiding this comment.
Would be nice if someone checks the boundary conditions for omega. I am not that familiar with the k-w model.
pcarruscag
reviewed
Jul 10, 2022
Comment on lines
+60
to
+70
| - `SST_OPTIONS`: | ||
| - `NONE`: No SST turbulence model (default). | ||
| - `V1994m`: refers to the "Standard" Menter SST model from 1994 with the modified constant $\sigma_{k1}$ and the redefinition of the turbulent eddy viscosity. | ||
| - `V2003m`: refers to the Menter SST model from 2003 ignoring the $\tau_{ij}$ in the momentum and energy equations and the production term is approximated by $P = \mu_t S^2$. | ||
| - `VORTICITY`: refers to the vorticity source term correction. | ||
| - `KATO_LAUNDER`: refers to the Kato-Launder correction. | ||
| - `UQ`: refers to the V1994m version with uncertainty quantification modifications.?? | ||
| - `SUSTAINING`: refers to the controlled decay correction. | ||
|
|
||
| - `SA_OPTIONS`: | ||
| - `NONE`: refers to the modification where the $f_{t2}$ term is set to zero, i.e., $c_{t3} = 0$ (default). |
Member
There was a problem hiding this comment.
This does not have to be repeated here... just point to the section in Physical definition.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Update the documentation of Solver-Setup.md
The idea is to make divide #59 into small pull requests in order to make things smoother and easier. This one addresses only the Solver-Setup.md.
There is documentation for certain fields still missing, e.g., SST_OPTIONS. I am not sure about each of them. I will work on that.Done.There seems to be some problem with markdown-latex that I cannot solve. I will work on that.Something is odd. In my local machine everything works fine.